This 1–10 L valve pouch is built for herbal extract producers in Germany and the EU who need practical liquid dispensing without over-specifying the format. The standard high-barrier structure is PET/VMPET/PE, with an optional mono-PE recyclable construction where barrier and shelf-life requirements allow. Food-contact grade film, controlled sealing and a fitment welded into the pouch help support filling-line integration and leak-conscious handling. The valve/spout configuration is selected for controlled pouring or dispensing, and can be matched to your filling equipment and closure preference. Artwork is produced with 10-colour rotogravure printing for clear brand, dosage and batch information on the finished pouch.
For herbal extract, the valve pouch can be configured for low-viscosity to semi-viscous liquids, with a fitment and cap selected to suit your filling nozzles, torque settings and end-use dispensing routine. The pouch format supports batch coding, lot traceability and clear front/back panels for EU label information, while the welded valve area is designed for controlled opening and resealing in daily use. We keep the project practical: confirm capacity, film structure, valve type, artwork and filling method, then approve a pre-production sample before mass production. Standard MOQ is 10,000 pouches per size and print design; lower quantities can be discussed for trial runs. Sampling typically follows artwork and dieline approval, with production scheduled after sample sign-off.
For German and EU buyers, recyclability should be evaluated together with barrier, filling speed and shelf-life targets. We can review mono-PE or other recyclable structures against your herbal extract formulation, then recommend a practical film and valve combination rather than an unverified claim. PPWR-aligned design discussions can cover material reduction, fitment choice, pack size and clear sorting information. Production takes place in our Dongguan factory with a 15,000 m² clean workshop and 10-colour rotogravure printing, supporting consistent colour and copy across repeat orders. Typical lead time is 18–25 working days after sample approval and deposit, subject to valve availability and print complexity. Please share your capacity, filling method and target market so we can quote a specification-first valve pouch.
