ホットライン +86 15916881866 mkt@kody.ltd

3–10 L Valve Pouch for Dairy Cream, Food-Contact PE/EVOH Film, Custom 10-Colour Gravure Print

3–10 L Valve Pouch for Dairy Cream, Food-Contact PE/EVOH Film, Custom 10-Colour Gravure Print

サムネイルをクリックしてメイン画像を変更してください

A specification-led valve pouch for dairy cream in 3–10 L formats, built from food-contact PE/EVOH film with a weld-in valve, 10-colour rotogravure branding and filling-line-ready seals for German and EU dairies.

Valve Pouch 無料サンプル・お客様のデザインや現物サンプルに基づくカスタム対応
価格
ご要望に応じてお見積り（材質・サイズ・数量に基づいて）
Capacity3 L, 5 L, 10 L; custom sizes reviewed
StructurePET/AL/PE, PET/PE, or mono-PE/EVOH food-contact film options
Spout/ValveWeld-in dairy valve, 16–32 mm options; orientation set to filling line
Printing10-colour rotogravure; matt or gloss; artwork approval required
MOQ10,000 printed pouches per SKU; trial quantities discussed
Lead timeSamples 7–10 working days; production 15–25 working days after approvals
この製品についてお問い合わせ お電話ください

製品概要

This 3–10 L valve pouch is configured for dairy cream, including UHT cream, whipped cream and dairy concentrates. The pouch body uses food-contact-grade laminated film selected for dairy filling; typical structures are PET/AL/PE for barrier, PET/PE for clear presentation, or mono-PE/EVOH where a recyclability-oriented pack is preferred. A weld-in valve supports controlled dispensing and resealing, while the bottom gusset and reinforced seals stabilise the pouch during filling, palletising and chilled or ambient distribution. Capacity can be adjusted across 3 L, 5 L and 10 L formats, with valve placement, seal geometry and film stiffness reviewed against the customer’s filling equipment before sampling.

Filling-line fit is a central part of the specification. The valve pouch can be supplied flat or pre-opened for automated filling through the valve, depending on the filler and product viscosity. We review valve throat, cap torque, pouch opening, film stiffness and seal width with the customer’s line team to reduce changeover risk. For barrier-sensitive dairy cream, PET/AL/PE is a practical option; for chilled cream, PET/PE or PE/EVOH may suit. Sampling starts with a stock or unprinted valve pouch for line trials, followed by a production-intent sample after artwork, film structure and valve choice are approved. Trial reports are based on the customer’s own filling and distribution tests, not assumed performance.

Custom printing is produced by 10-colour rotogravure, with matt or gloss film surfaces and artwork prepared for German market labelling, lot coding and cream-product information. Print registration and colour targets are approved before filling trials; plates and print samples are handled as part of the project brief. Custom printed MOQ is 10,000 pouches per SKU, while unprinted or stock-fitment trial quantities can be discussed for line qualification. Typical sampling is 7–10 working days after artwork and structure approval, with production lead time confirmed after sample sign-off and order release. The listing is intended for EU food-contact review and PPWR-aligned packaging planning; final compliance depends on the selected film, valve and intended dairy-cream contact conditions.

更新済み: 2026-11-05

Display Disclaimer

1. This company is engaged solely in the manufacture and sale of packaging bags, and does not produce or sell any of the finished goods displayed on this page;

2. All graphics, images and related content displayed on this page serve only to demonstrate packaging design, printing effects or product capabilities. They do not indicate that this company manufactures or sells the corresponding finished goods, nor that this company holds any rights in the graphics, trademarks or brands shown;

3. If any displayed image contains trademarks, logos, brand names or other intellectual-property content, all such rights belong to their respective lawful owners. This company has not obtained any authorization, licence or approval from such rights holders, and no affiliation, cooperation, sponsorship or endorsement exists between this company and any rights holder;

4. This company has no intention of infringing any third party's lawful rights and interests, and asserts no intellectual-property rights over the displayed content. The display should not be construed as a trademark use, a brand endorsement or an indication of the commercial source of the goods;

5. Should any rights holder or third party believe that our displayed content infringes its lawful rights and interests or is otherwise improper, please contact us via the phone or email listed on this page. We will promptly remove, replace or adjust the relevant content.

関連製品

Valve Pouch1–10 L Valve Pouch for Aseptic Puree, High-Barrier, 10-Colour Rotogravure, Custom-Printed

1–10 L Valve Pouch for Aseptic Puree, High-Barrier, 10-Colour Rotogravure, Custom-Printed

A 1–10 L valve pouch for aseptic puree, built with high-barrier film, a weld-in spout valve, 10-colour rotogravure printing and filling-line-ready options for German and EU food producers.

  • Capacity: 1–10 L fills, subject to valve and film specification
  • Structure: High-barrier PET/VMPET/PE or EVOH-containing PE; mono-material options subject to performance
  • Spout/Valve: Weld-in spout valve with cap options; dimensions matched to filling line
詳細を見る
Valve Pouch1–5 l Valve Pouch, High-Barrier Foil Laminate, 10-Colour Rotogravure, for Edible Oil

1–5 l Valve Pouch, High-Barrier Foil Laminate, 10-Colour Rotogravure, for Edible Oil

A 1–5 l high-barrier valve pouch for edible oil, with food-contact grade film, 10-colour rotogravure branding, filling-line fitment review and PPWR-aligned recyclable options for German and EU buyers.

  • Capacity: 1 l, 2 l, 3 l, 5 l (custom sizes reviewed)
  • Structure: PET/AL/PE or PET/VMPET/PE high-barrier laminate; mono-PE recyclable option subject to barrier review
  • Spout / valve: Welded valve/spout fitment; neck, cap thread and valve specification confirmed against filling line
詳細を見る
Valve Pouch3 l Valve Pouch for Sauce Base, Food-Contact Laminate, 10-Colour Rotogravure, EU Filling-Line Fit

3 l Valve Pouch for Sauce Base, Food-Contact Laminate, 10-Colour Rotogravure, EU Filling-Line Fit

A 3 l valve pouch for sauce base, built from food-contact PET/AL/PA/PE or PET/VMPET/PE laminate with welded dispensing valve, 10-colour rotogravure printing, 10,000-piece MOQ and sampling for EU filling lines.

  • Capacity: 3 l standard; custom capacities on request
  • Structure: PET/AL/PA/PE or PET/VMPET/PE; food-contact PE sealant
  • Spout/Valve: Welded screw-cap valve or tap valve; tamper-evident and custom fitment options
詳細を見る
お問い合わせ

お問い合わせ・お見積り依頼

ご希望の仕様をお聞かせください。営業時間内に、素材や加工工程に関するアドバイスを添えてご返答いたします。

担当者
ジン・ロンシェン営業本部長
ホットライン
+86 15916881866
メール
mkt@kody.ltd
工場住所
中国広東省東莞市中堂鎮北王路171号海碩国際産業園2～5階
営業時間
月～土 08:30～18:00（祝日は電話サポート対応）

お問い合わせ・お見積り依頼

*が付いた項目は必須です。お客様の情報は、このお見積りにのみ使用されます。
3–10 L Valve Pouch for Dairy Cream, Food-Contact PE/EVOH Film, Custom 10-Colour Gravure Print