Klik thumbnail untuk mengubah gambar utama
A specification-first 5 l foil pouch for mineral water, combining PET/AL/PE barrier film, spout options, 10-colour rotogravure printing and food-contact grade materials for German and EU filling lines.
| Capacity | 5 l standard; 3–10 l options by project |
|---|---|
| Structure | PET/AL/PE; mono-PE or PP-rich recyclable-ready alternatives subject to application review |
| Spout/Valve | Center or offset spout; valve not required for mineral water; diameter and weld flange to filler; cap confirmed by sample |
| Printing | 10-colour rotogravure; artwork checked for spout clearance and seal areas |
| MOQ | 10,000 pouches per design and structure; trial quantities by discussion |
| Lead time | 20–30 working days after artwork and pre-production sample approval |
This foil pouch is engineered for mineral water in German and EU filling environments. The standard laminate is PET/AL/PE, combining a printable PET face, aluminium foil barrier and food-contact grade PE sealing layer; PE thickness and spout weld geometry are set to the filler. The pouch can be supplied with a center or offset spout, suitable for automatic fill-seal lines, and the flat or stand-up base is specified after filling trials. For PPWR-aligned projects, we review mono-PE or PP-rich recyclable-ready alternatives where shelf-life and line fit allow. Film is food-contact grade; final compliance documentation is confirmed against the ordered structure and intended use.
Printing uses 10-colour rotogravure, so brand graphics, batch coding zones and German-language filling information can be handled in one production stream. Artwork is checked for spout clearance, seal areas and print distortion before cylinders are approved. Typical MOQ is 10,000 pouches per design and structure, with lower trial quantities considered for filling-line qualification. Pre-production samples allow spout fit, drop and seal checks before mass production; production lead time is normally 20–30 working days after artwork and sample approval. For mineral water, we recommend a matte or gloss PET outer face and a clearly marked spout direction to support efficient automatic filling.
For EU buyers working toward PPWR and recyclability targets, the discussion should start with the application: mineral water is a low-oxygen-sensitivity product, so a recyclable-ready mono-PE structure may be evaluated where the required shelf life and spout performance allow. If foil barrier is retained, we keep the laminate specification transparent and avoid recyclability claims that the structure cannot support. Filling-line fit is confirmed through spout diameter, weld flange, pouch stiffness and case packing. Kody produces in a 15,000 m2 clean workshop with 10-colour rotogravure, spout pouch and roll film capability; orders are made-to-order, and compliance documents are matched to the final food-contact structure.
Diperbarui: 2026-11-05
1. This company is engaged solely in the manufacture and sale of packaging bags, and does not produce or sell any of the finished goods displayed on this page;
2. All graphics, images and related content displayed on this page serve only to demonstrate packaging design, printing effects or product capabilities. They do not indicate that this company manufactures or sells the corresponding finished goods, nor that this company holds any rights in the graphics, trademarks or brands shown;
3. If any displayed image contains trademarks, logos, brand names or other intellectual-property content, all such rights belong to their respective lawful owners. This company has not obtained any authorization, licence or approval from such rights holders, and no affiliation, cooperation, sponsorship or endorsement exists between this company and any rights holder;
4. This company has no intention of infringing any third party's lawful rights and interests, and asserts no intellectual-property rights over the displayed content. The display should not be construed as a trademark use, a brand endorsement or an indication of the commercial source of the goods;
5. Should any rights holder or third party believe that our displayed content infringes its lawful rights and interests or is otherwise improper, please contact us via the phone or email listed on this page. We will promptly remove, replace or adjust the relevant content.
A high-barrier spouted foil pouch for aseptic fruit and vegetable puree, built with PET/AL/PE film, 10-colour rotogravure printing and filling-line options for EU food-contact packaging projects.
A 5 L foil pouch for fruit juice, built with high-barrier food-contact laminate and a wide-bore spout for reliable filling, dispensing and EU-oriented packaging projects.
High-barrier foil pouch for dairy cream in PET/AL/PE or PET/AL/PA/PE, with spout options, 10-colour rotogravure printing and filling-line support for German and EU dairy projects.
Beri tahu kami apa yang Anda butuhkan dan kami akan menghubungi Anda kembali pada jam kerja dengan saran material dan proses.